WLD-PC Powder coating equipment introduction
Filter element powder-recycling system Booth
1) Name:WLD type power-recycling equipment. | |||
2) Equipment body size:L3700mm×W2360mm×H2370mm | |||
3) Recycling adopts filter element power-recycling system,configured with polyester fiber filter element,filter material from Taiwan. | |||
4) Filter element cabinet design is flat basic type,convenient for Powder recycling. | |||
5) Back flushing adopts high compressed air,the flushing time controlled by circuit board,back flushing gap fixed at 60 seconds,back flushing time 1 second. | |||
6) Electrostatic powder painting adopts compressed air which processed by drying,drying air compressor equipped by 1.0m3min.(air compressor provided by customer themselves) | |||
7) Material bill technical index: | |||
Number |
Item |
Material bill,specifications and parameter |
Remark |
1 |
Room body wall panel |
Power coating galvanized steel panel |
1.2mm |
2 |
Bottom panel |
Power coating stainless panel |
2.0mm |
3 |
Lighting fixture |
Autifog lighting fixture |
2 lamps |
4 |
Air tank |
Seamless steel pipe |
ø 140、outfall setted |
5 |
Air pipe, piece |
Galvanized pipe,piece |
1 inch |
6 |
Fan |
Model 4-72-4.5A |
1 set Power supply 380v |
7 |
Air Flow:9800m3/h |
||
8 |
Full pressure :1320pa |
||
9 |
Power 7.5KW |
||
10 |
Filter element specs |
φ325×600 |
5 pieces |
Advantages:
High powder recycling rate,can reach 95%,save material and energy,
The recycled powder can be used again and again,continuously working available;
Cover small place and low noise;
Safe and reliable,the service life over 10 years.